Saturday, March 2, 2019
Harry Potter Quilt Week 7: Harry's Glasses
Welcome back to Sew Along Saturday #7 where, this week, we're making Harry's Glasses! As you can see, I changed them a little to be more accurate.
This block only uses four colors! Let's get cutting!
Background:
(8) 1 1/2" sq.
(1) 1 1/2 x 3"
(1) 1 1/2 x 3 1/2"
(1) 1 1/2 x 4"
(2) 2" sq.
(1) 2 x 2 1/2"
(1) 2 x 4"
(1) 2 x 6"
(7) 2 1/2" sq.
(1) 2 1/2 x 4"
(1) 2 1/2 x 5"
(1) 3" sq.
(1) 3 1/2 x 4"
(1) 3 1/2 x 4 1/2"
(1) 3 1/2 x 5 1/2"
(1) 4 x 18 1/2"
(1) 5 x 7"
(1) 5 x 7 1/2"
(1) 5 x 10 1/2"
Black:
(12) 1 1/2" sq.
(1) 1 1/2 x 2"
(1) 1 1/2 x 2 1/2"
(5) 1 1/2 x 3"
(2) 1 1/2 x 4"
(3) 2" sq.
(1) 2 x 3"
(1) 2 1/2 x 3 1/2"
(1) 2 1/2 x 4"
(1) 3" sq.
(1) 3 x 4"
White:
(2) 3" sq.
Yellowish White:
(1) 1 1/2" sq.
Part One:
1. Using (2) 1 1/2" sq. of background and (1) 1 1/2" sq. of black, make one three-patch HST.
2. Assemble as shown below. Label as Section 1 and set aside.
Part Two:
1. Using a 2 1/2 x 3 1/2" rect. of black and (2) 2 1/2" sq. of background, with long edge facing up, make one double upper corner unit.
2. Repeat using a 3 1/2 x 4" rectangle of background, with short edge facing up, and (2) 2" sq. of black.
1. Place a square at the left end or left upper corner of a rectangle or larger square, right sides together.
3. Using a 3 x 4" rectangle, short edge facing up, a 2 1/2" sq. of background in the left lower corner, and a 3" sq. of background in the right upper corner, make one left lower/right upper clip & flip unit.
4. Repeat using a 2 x 3" rect. of black, LONG edge facing up, a 2" sq. of background in the left lower corner, and a 1 1/2" sq. of background in the right upper corner.
5. Repeat using a 3" sq. black, a 2" sq. of background in the left lower corner, and a 2 1/2" sq. in the right upper corner.
1. Place a square at the left end or lower left corner of a rectangle or larger square, right sides together.
6. Using a 2 1/2 x 4" rectangle of background, SHORT edge facing up, and a 1 1/2" sq. of black, make one right upper corner clip & flip unit.
7. Repeat, using a 3 1/2 x 4 1/2" rectangle of background, LONG edge facing up, and a 1 1/2" sq. black.
1. Place square at upper end or right upper corner of rectangle or larger square, right sides together.
7. Assemble as shown below. Label as Section 2 and set aside.
Part Three:
1. Using (2) 1 1/2" sq. of black and (1) 1 1/2" sq. of background, make one three-patch HST unit. Repeat for total of three units.
*see illustration from Part 1*
2. Using 1 1/2 x 3 1/2" rectangle of background, long edge facing up, and (2) 1 1/2" sq. of black, make one double upper corner clip and flip unit.
*see illustration from Part 1*
3. Using a 1 1/2 x 4" rect. of black, LONG edge facing up, and a 1 1/2" sq. of background, make one lower left clip and flip unit.
1. Place square at lower end or left lower corner of rectangle or larger square, right sides together.
4. Assemble as shown below. Label as Section 3 and set aside.
Part Four:
1. Stitch 2 x 2 1/2" rect. of background and 1 1/2 x 2" rect. of black together as shown below. Then, using this unit, LONG edge facing up with black end at the left, and a 2" sq. of black, make one left lower corner clip & flip unit.
2. Using 3 1/2 x 5 1/2" rect. of background, SHORT edge facing up, and 1 1/2" sq. of black, make one left lower corner clip & flip unit.
3. Using 1 1/2 x 4" rect. of background, LONG edge facing up, and 1 1/2" sq. of black, make one left lower clip & flip unit.
*see Left Lower clip & flip illustration from Part 3*
4. Using 2 1/2 x 4" rectangle of black & (2) 2 1/2" sq. of background, SHORT edge up, make one left lower/right upper double clip & flip unit.
*see Left Lower/Right Upper Double Corner clip & flip illustration from Part 2*
5. Assemble as shown below. Label as Part 4 and set aside.
Block Assembly: Assemble as shown below. You will now have a block of Harry's Glasses!
Tune in next weekend for block #8. For a downloadable PDF of this block, CLICK HERE. Don't forget to check out which block Lorna is doing this week over at Sew Fresh Quilts, and don't forget to use the hashtags #hpqal2019 and #harrypotterquilt if you post on social media, so we can all find your blocks.
Looking forward to seeing your blocks pop up in the sew along group!
Hope you all have a great weekend!
Happy Stitching!
xoxo
This block only uses four colors! Let's get cutting!
Background:
(8) 1 1/2" sq.
(1) 1 1/2 x 3"
(1) 1 1/2 x 3 1/2"
(1) 1 1/2 x 4"
(2) 2" sq.
(1) 2 x 2 1/2"
(1) 2 x 4"
(1) 2 x 6"
(7) 2 1/2" sq.
(1) 2 1/2 x 4"
(1) 2 1/2 x 5"
(1) 3" sq.
(1) 3 1/2 x 4"
(1) 3 1/2 x 4 1/2"
(1) 3 1/2 x 5 1/2"
(1) 4 x 18 1/2"
(1) 5 x 7"
(1) 5 x 7 1/2"
(1) 5 x 10 1/2"
Black:
(12) 1 1/2" sq.
(1) 1 1/2 x 2"
(1) 1 1/2 x 2 1/2"
(5) 1 1/2 x 3"
(2) 1 1/2 x 4"
(3) 2" sq.
(1) 2 x 3"
(1) 2 1/2 x 3 1/2"
(1) 2 1/2 x 4"
(1) 3" sq.
(1) 3 x 4"
White:
(2) 3" sq.
Yellowish White:
(1) 1 1/2" sq.
Part One:
1. Using (2) 1 1/2" sq. of background and (1) 1 1/2" sq. of black, make one three-patch HST.
2. Assemble as shown below. Label as Section 1 and set aside.
Part Two:
1. Using a 2 1/2 x 3 1/2" rect. of black and (2) 2 1/2" sq. of background, with long edge facing up, make one double upper corner unit.
2. Repeat using a 3 1/2 x 4" rectangle of background, with short edge facing up, and (2) 2" sq. of black.
Double Upper Corners
1. Place a square at the left end or left upper corner of a rectangle or larger square, right sides together.
2. Stitch from right upper to left lower corner.
3. Clip, flip & press.
4. Place a square at the right end or right upper corner of a rectangle or larger square, right sides together.
5. Stitch from left upper corner to right lower corner.
6. Clip, flip & press.
3. Using a 3 x 4" rectangle, short edge facing up, a 2 1/2" sq. of background in the left lower corner, and a 3" sq. of background in the right upper corner, make one left lower/right upper clip & flip unit.
4. Repeat using a 2 x 3" rect. of black, LONG edge facing up, a 2" sq. of background in the left lower corner, and a 1 1/2" sq. of background in the right upper corner.
5. Repeat using a 3" sq. black, a 2" sq. of background in the left lower corner, and a 2 1/2" sq. in the right upper corner.
Left Lower/Right Upper Double
1. Place a square at the left end or lower left corner of a rectangle or larger square, right sides together.
2. Stitch from left upper corner to right lower corner.
3. Clip, flip & press.
4. Place a square at the right end or upper right corner of a rectangle or larger square, right sides together.
5. Stitch from left upper corner to right lower corner.
6. Clip, flip & press.
6. Using a 2 1/2 x 4" rectangle of background, SHORT edge facing up, and a 1 1/2" sq. of black, make one right upper corner clip & flip unit.
7. Repeat, using a 3 1/2 x 4 1/2" rectangle of background, LONG edge facing up, and a 1 1/2" sq. black.
Right Upper Clip & Flip
1. Place square at upper end or right upper corner of rectangle or larger square, right sides together.
2. Stitch from left upper to right lower corner.
3. Clip, flip & press.
7. Assemble as shown below. Label as Section 2 and set aside.
Part Three:
1. Using (2) 1 1/2" sq. of black and (1) 1 1/2" sq. of background, make one three-patch HST unit. Repeat for total of three units.
*see illustration from Part 1*
2. Using 1 1/2 x 3 1/2" rectangle of background, long edge facing up, and (2) 1 1/2" sq. of black, make one double upper corner clip and flip unit.
*see illustration from Part 1*
3. Using a 1 1/2 x 4" rect. of black, LONG edge facing up, and a 1 1/2" sq. of background, make one lower left clip and flip unit.
Left Lower Clip & Flip
1. Place square at lower end or left lower corner of rectangle or larger square, right sides together.
2. Stitch from left upper to right lower corner.
3. Clip, flip & press.
4. Assemble as shown below. Label as Section 3 and set aside.
Part Four:
1. Stitch 2 x 2 1/2" rect. of background and 1 1/2 x 2" rect. of black together as shown below. Then, using this unit, LONG edge facing up with black end at the left, and a 2" sq. of black, make one left lower corner clip & flip unit.
2. Using 3 1/2 x 5 1/2" rect. of background, SHORT edge facing up, and 1 1/2" sq. of black, make one left lower corner clip & flip unit.
3. Using 1 1/2 x 4" rect. of background, LONG edge facing up, and 1 1/2" sq. of black, make one left lower clip & flip unit.
*see Left Lower clip & flip illustration from Part 3*
4. Using 2 1/2 x 4" rectangle of black & (2) 2 1/2" sq. of background, SHORT edge up, make one left lower/right upper double clip & flip unit.
*see Left Lower/Right Upper Double Corner clip & flip illustration from Part 2*
5. Assemble as shown below. Label as Part 4 and set aside.
Block Assembly: Assemble as shown below. You will now have a block of Harry's Glasses!
Tune in next weekend for block #8. For a downloadable PDF of this block, CLICK HERE. Don't forget to check out which block Lorna is doing this week over at Sew Fresh Quilts, and don't forget to use the hashtags #hpqal2019 and #harrypotterquilt if you post on social media, so we can all find your blocks.
Looking forward to seeing your blocks pop up in the sew along group!
Hope you all have a great weekend!
Happy Stitching!
xoxo
Subscribe to:
Post Comments
(Atom)
Buy Me a Coffee
Shop My Store
Patterns & Quilty Gifts
Easy-to-Piece, Beginner and Confident Beginner Friendly Quilt Patterns
SHOP ACCUQUILT!
Team GO Getter!
Click or Scan
gift guide
Subscribe To
Posts
Comments
Fabric for One Giant Stitch
Fun Block Ideas
Have a Question?
Come Sew Along!
Harry Potter Sew Along Fabric Kit
Background
Come Sew Along!
Pokemon Sew Along Fabric Kit
Come Sew Along!
Minecraft Sew Along Fabric Kit
Fun Fabric Shops
............................
2 comments...:
You are beyond imaginative Kelli!
In part 4, number 3, shouldn't it be a rectangle of black and 1 1/2" sq of background? That's what the picture shows, but the directions are the opposite (see below).
3. Using 1 1/2 x 4" rect. of background, LONG edge facing up, and 1 1/2" sq. of black, make one left lower clip & flip unit.